COMPRESSOR BRACKETS

The compressor, Alternator,Power Steering Brackets as well as Pulleys offered for Chevrolet V8's
are specific as to the water pump used on the motor.
Below are the dimensions for Chevrolet V8's Long & Short Water Pumps for both Small Blocks & Big Blocks.

The compressor brackets offered are for the Sanden 508 aftermarket compressor.
Although not as common, the Sanden 510 and 709 will also work on these brackets.
However, Sanden compressors used in factory A/C systems will Not Work with these brackets.
For a complete listing of Compressor & Alternator Brackets please go to our engine ENGINE BRACKETS area.

ALTERNATOR BRACKETS

The alternator brackets are designed for GM internally or externally regulated alternators.
The brackets are designed for alternators with 12 o'clock mounting tabs meaning
that the tabs are directly opposite of each other.
For a complete listing of our Alternator brackets please go to our ENGINE BRACKETS area.

POWER STEERING BRACKETS

Our line of power steering brackets are designed to mount Chevrolet power steering pumps
with attached reservoirs. As there are several designs, any pump with two attachment points on
the back may be used with the correct V8 power steering pulley.
For a complete listing of our Brackets please go to our ENGINE BRACKETS area.